PSP Learning Management System

ELECTRICAL WIRING course exposes students to the various aspects of wiring installation according to the MS IEC 60364 standard. Students will be able to relate theoretical aspect in practical work on electrical wiring during workshop sessions. This course also provides students with the knowledge and skill in doing different types of wiring installation, wiring protection, wiring inspection, wiring testing and sustainable energy practices in electrical wiring.

ELECTRICAL MACHINE course expose students to the basic construction, principle of operation and control of various type of motor and generator. This course provides students with the basic knowledge and skills to solve various problem related to motors and generators.

This subject covers topic on:

*LTI System for continous - time and discrete - time signal.

*Z-transform in LTI System

*Laplace Transform

*Fourier Analysis

FIBER OPTIC COMMUNICATION SYSTEM introduces students to the basic concept of fiber optic in communication systems with environmental sustainability. This course covers fiber optic characteristics, components in fiber optic system, losses in fiber optic cable and the fundamental concept of optical measurement. This course also provides knowledge in splicing techniques with safety awareness, multiplexing techniques and design consideration in fiber optic communication link.

INTERNET BASED CONTROLLER provides knowledge and exposure in advanced technology. The course focuses on the basic knowledge of hardware component, wireless communication technologies and wireless sensor network. Green network in Internet of Things will help student to exploits on environmental conservation and surveillance to minimize the cost and power consumption in development of project.

EMBEDDED ROBOTIC presents the combination of mobile robots and embedded systems, from introductory to intermediate level.  It is structured in three parts, which are embedded systems, mobile robot, and mobile robot applications.  These parts are essential to students in mastering the crucial steps of building a complete working robotic system.  They will help them to develop robots that not only can move, but intelligent as well

CMOS INTEGRATED CIRCUIT DESIGN AND FABRICATION course exposes the students to the basic integrated circuit (IC) and CMOS IC fabrication processes which include oxidation, doping, photolithography, metallization and etching. This course also covers IC testing, reliability and failure analysis. The students will be equipped with the knowledge of inverter design and simple to complex CMOS logic gates. The students will experience developing the physical layout of integrated circuit based on specific transistor feature size and using CAD tools while adhering to specific design rules. Finally, this course also covers the topic on design methodology used in designing integrated circuits.

COMPUTER SYSTEM DIAGNOSIS AND MAINTENANCE course provides knowledge on the general concept of computer system diagnosis and maintenance. Students are exposed to computer system  hardware, laptop system, computer peripherals and security. The course focuses on the methods of operation, installation, diagnostic, troubleshooting and maintenance in computer hardware.

DATABASE SYSTEM course offers a comprehensive coverage of basic concept and application of data manipulation. Student will learn the fundamental concepts and techniques for designing and developing database and manipulating data using Structured Query Language (SQL).

STRENGTH OF MATERIALS provides knowledge on concepts and calculation of forces on materials, thermal stress, shear force and bending moment, bending stress, shear stress and torsion in shafts. It also deals with the experiments conducted on tensile test, bending moment, shearing force, torsion and deflection.

CLO 1    

 Apply the concepts of strength of materials to solve related problems

CLO2    

Organize appropriately experiments in groups according to the Standard Operating Procedures

CLO3    

Demonstrate an understanding of professional ethics, responsibilities and norms of engineering practices according to the laboratory safety regulation

WORKSHOP TECHNOLOGY provides exposure and knowledge in using hand tools,

machine operation such as drilling, lathe, milling and computer numerical control. It

also covers on gear measurement and inspection welding process in oxy acetylene,

Shielded Metal Arc Welding (SMAW), Gas Tungsten Arc Welding (GTAW) and Gas

Metal Arc Welding (GMAW).

CLO1 :  Apply the knowledge of basic mechanical components and equipment, hand tools and measuring equipment in workshop technology (C3, PLO1)

CLO2 : Apply standard practice in operating mechanical tools and

Component (C3, PLO8)

CLO3 : Demonstrate continuous learning and information

management skills to complete assigned task (A3, PLO12)

FLUID MECHANICS provides students with a strong understanding of the fundamentals of fluid mechanics principles related to the fluid properties and behavior in static and dynamic situations. This course also exposes the students to the demonstration at the real equipment of fluid mechanics.

INDUSTRIAL ROBOTICS introduces to the robotic system which emphasize on industrial robot components such as actuators, robot sensors, robot end effectors and control system. Topics also discuss on industrial robot application including the advantages and disadvantages of using robots. The course complete with an explanation of the robot classification, robot programming operations, ANSI robotics safety standard and maintenance process.

PLANT SERVICES DRAWING are planned so as the student shall acquire sufficient skill in various aspects such as background understanding in designing, developing and creating process flow diagram (PFD), piping and instrumentation diagram (P&ID), and plant 3D drawing. This will emphasis knowledge and clear understanding of the design and engineering principles used in plant layout and piping design

DYEING AND FINISHING focuses mainly on textile wet processing with preference to the processing of woven cotton fabrics. Students will learn the importance of the preparation process, selection of dyes and finishes, dyeing and printing techniques, color matching process and waste water treatment.

DISTRIBUTION MANAGEMENT provides an understanding in difference methods of dynamics logistics distribution. It focuses on physical distribution used in supply chain and describes factors in selecting appropriate channel, policies and strategies, special distribution methods, logistics and communication, and elements of distribution logistics.

This course also covers the strategy international distribution management in global supply chain.

INTRODUCTION TO INTERNATIONAL BUSINESS provides an overview of how international business is conducted by taking into consideration various mechanism for dealing with governments and the changing political landscape, different business laws and regulations, local customs and culture. This course fulfills the need to ensure that students are well versed in global operations

INTRODUCTION TO INTERNATIONAL BUSINESS provides an overview of how international business is conducted by taking into consideration various mechanism for dealing with governments and the changing political landscape, different business laws and regulations, local customs and culture. This course fulfills the need to ensure that students are well versed in global operations

FUNDAMENTALS OF SUPPLY CHAIN MANAGEMENT is a significant management approaches and strategic to increase the efficiency and effectiveness of organization’s operational. This course is designed for the students to optimize the supply chain management decisions at operational, tactical and strategic level in this fast-changing business world currently. Besides, it will put the supply chain into the greater exploration of modeling, computation and Information Technology that enable implementation of solution.

EXPORT IMPORT DOCUMENTATION AND PROCEDURES course provides knowledge to students in customs, export import documentation and procedures. Through this course exposed to relevant export and import documentation and the procedures being used currently, information on export and import industries in the world and the export and import methods. Definitions of key words and terms used in the documents of import and export activities are also explained.

MALAYSIAN TAXATION 1 provides knowledge to students on taxation system applied in Malaysia, the method in determining resident status and the sources of income. Students will also be introduced to the method of calculating income from various sources, tax exemptions and tax relief for separate assessment or joint assessment.

COMPANY LAW provides knowledge on the principles and law that need to be adhered to by a company in Malaysia. This course gives emphasizes towards the incorporation of a company, the management and administration of a company, the company’s financial aspects and the winding up of a company. This course also provides comprehensive knowledge on the importance of the provisions under the Company Act 2016.

AUDITING provides students with an understanding the nature, purpose, scope and issues related to audit field. Students will learn about the professional auditing practices and know the regulatory standards used in audit profession in Malaysia. Students will be exposed to the auditing process which includes understand about internal control system, audit planning, audit objectives and general principles, audit sampling, materiality and audit risk.

COST AND MANAGEMENT ACCOUNTING 2 provide knowledge to student on cost and management accounting system which accumulates, classified, summarizes and reports information to assist management in decision making.

ISLAMIC FINANCIAL SYSTEM discusses the history of Islamic banking and in the

modern era including the development and the structure of financial system as well as

legal framework and legislation in Islamic banking and finance. This course also

covers the relevant issues in Islamic banking and finance for students to understand

the current scenario due to the globalization

SYNOPSIS

ISLAMIC INVESTMENT course provides comprehensive overview of Islamic investment to students. In this course, students will be able to identify concepts of Islamic investment, regulatory and standard-setting bodies related to Islamic investment activities. Students will also be able to identify Islamic bond known as sukuk, its concepts, characteristics and risks underlying sukuk structure. This course will also discuss types of financial instruments, concepts and calculation of risk and return in investment, types of investment analysis, equity valuation methods and securitization

ISLAMIC CAPITAL MARKET course is designed to enable students to develop an appreciation of Islamic capital market. In this course, students are provided with an outline of each of the major concerns of an Islamic capital market. Students will be introduced to introduction to Islamic capital market, Islamic capital market and instruments, equity markets, Islamic bond (sukuk), regulation and supervision of Islamic capital market and comparison between Islamic capital market and conventional capital market.

BANK OPERATIONS exposes students to sources of fund, treasury operation and the usage of fund in Islamic banking.  This course also introduces the current practice of Dual Banking structure in Malaysia, religious foundation of Islamic banking, features of modern era electronic banking and remittance services.  Throughout this course, different types and characteristics of Islamic deposit, investment structured products, financing, trade financing and securities for investment are described.

MACROECONOMICS provides information on the concepts of economics as a whole. The course emphasizes the role of economics sectors in determining the GDP. This course also provides information on the importance of government policy to overcome the economic problem.

BUSINESS MATHEMATICS provides knowledge of various basic mathematical concepts, management problems and basic operational research techniques based on financial and quantitative methods. The course emphasizes the application of mathematical concepts and solutions in business and management. This course provides information and exposes the student to basic practices in the world of business and finance

BUSINESS PROJECT provides students with an opportunity to apply knowledge and skills on how to construct new ideas and provide solutions to current issues or challenges faced by businesses. Students will be able to apply business concepts and strategies acquired throughout their studies to address a specific business issue in areas such as accounting, entrepreneurship, human resources, management, insurance, banking and finance, marketing, logistics and supply chain, retailing and international business

ORGANIZATIONAL BEHAVIOUR course presents a behaviorally oriented course combining the functions of management with the psychology of leading and managing people. This course in organizational behavior encompasses the study of individual and group behavior in organizational settings. As a result, issues and topics touching on many academic disciplines may become the subject of study in the field of organizational behavior.

BUSINESS LAW provides knowledge regarding legal aspects and conducts of business transactions in Malaysia. The course is related to an introduction to the legal principles in Malaysia, basic principles of contracts, legal aspects of business entities, agency and sale of goods.

Statistics provides knowledge and exposure to of statistical statistical concepts, techniques, and how to utilize these techniques in data collection procezses.  This course emphasizes on the knowledge and the ability to handle statistical data and interpret them effectively.  This course also provides understanding on how to apply statistical dats in relevant fields.

BUSINESS MATHEMATICS provides knowledge of various basic mathematical concepts, management problems and basic operational research techniques based on financial and quantitative methods. The course emphasizes the application of mathematical concepts and solutions in business and management. This course provides information and exposes the student to basic practices in the world of business and finance.

POM procvides information on basic functions inmanagement which consists of planning, organizing, leading , controlling and desicion making as practised in the organization.  This couorse emphasizes the principels in management functions to ensure the efficiency and the effectiveness of in the organizations.

MICROECONOMICS provides information on concepts, basic principles and related problems. The course emphasizes the demand and supply theory, elasticity and production as well as market equilibrium. This course also provides information on output level determination and market price structure.

BUSINESS FINANCE exposes the students on the concepts of finance and  techniques used to manage the financial planning of an organization. The theories and concepts of basic financial are discussed as a benchmark and input for consideration, in order to make short and long term financial decisions from the  aspect of financing and investment. Apart from that, organization’s financial  analysis is used to analyze the organization’s financial position

SAINS, TEKNOLOGI DAN KEJURUTERAAN DALAM ISLAM memberi pengetahuan tentang konsep Islam sebagai al-Din dan seterusnya membincangkan konsep sains, teknologi dan kejuruteraan dalam Islam serta impaknya, pencapaiannya dalam tamadun Islam, prinsip serta peranan syariah dan etika Islam, peranan kaedah fiqh serta aplikasinya.

ENGLISH FOR DIGITAL TECHNOLOGY (MPU22053) emphasises the skills required at the workplace to describe products or services as well as processes or procedures related to Digital Technology. This course will also enable students to make and reply to enquiries and complaints related to the field of Digital Technology.